How much time do we waste in traffic jams? I made an Arduino-powered destination notifier to utilize this time in a productive way.
Project tutorial by Amal Mathew
Professional quality wireless weather station.
This is my fourth tutorial focusing on Scratch and physical computing.
Project tutorial by MJRoBot
Intelligently reduce the moisture in your basement/crawlspace to help control mildew growth and lower your heating/cooling bill.
Project tutorial by Christian
My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely
This project will attempt to show how much alcohol is in the air (semi-quantitative measurements).
Project tutorial by ScottC
I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Project tutorial by Patchr
This project uses sensors to monitor indoor natural gas on the basis of Arduino, and will sound the alarm if the gas leak exceeds the limit.
Project tutorial by Andrew85
In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application.
An Arduino-based digital scale with HX711 and VFD display.
Project showcase by antiElectron
As the title says, this is a pretty simple PIR motion controlled relay using an Arduino Nano.
Project tutorial by HeathenHacks
This Smart Blind Assistant helps blind people to sense their environment. This assist device can also be connected through Bluetooth.👁️
Project in progress by Chandru S
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
Seismic activity or "Vibrations of the earth" is measured using ProtoCentral's OpenPressure 24-bit DAQ System.
Project showcase by Team ProtoCentral
Learn how to detect Smoke and inflammable gases using an MQ-7 sensor.
Project showcase by Jiss Anto
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
Read data from an absolute orientation sensor without writing any code!
by Matt Wayland
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
This project shows tilt sensors and its functions.
Measure the dew point and humidity with an Arduino-based Chilled Mirror Hygrometer.
Project tutorial by schouten_tjeerd
Building a rain sensing alarm with Arduino.
by Smit Babariya
Or connect with your social account:
New here? Create an account