You can play the game on a 8x32 LED matrix, and control it with the help of a joystick. There are two bonus LEDs, which are some power ups,
Sound sensing, navigation, and obstacle detector.
by Smart Creativty
Give the axis of an inkjet printer a new job.
by Ingo Lohs
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
This doorbell can operate without touch the switch.
by Akshay Joseph
This article explains how to interface a Bluetooth module with HC-05 with Arduino Uno.
A Fun version of the Minesweeper game, using Arduino Leonardo, 8x8 NeoMatrix Led Array, Button and Joystick Module.
by Djair Guilherme
Use the latest ATtiny processors in the Arduino Environment. These have the memory capacity of ATmega chips in smaller and cheaper packages.
by John Bradnam
In this article we discuss about how to Servo motor interface with Arduino Uno
Small introduction about interrupts using Arduino.
by Rafi Rasheed T C
Soil Moisture Sensor is a modern, completely sealed capacitive 1-Wire moisture sensor with temperature sensor. How to use it with Arduino?
by Martin Hubáček
Health authorities recommend washing your hand for at least 20 seconds. This device monitors the time while you washing your hands.
Build a line follower using an LM324N with a backup Arduino Nano.
by Ajaya Dahal
Discover a line
Control 256 relays! Seeing is believing!
It's an arduino based game in which one player will throw light using push buttons and other player have to catch light using joystick
by Nidhi Agarwal
It feels awesome when you have the power to control things remotely.
The small MIDI decoder was constructed to support LED indicators for stops switches in software GrandOrgue or Hauptwerk (VPO).
In this tutorial, you’ll learn how to use the BMP180 sensor, which is one of the most commonly used sensors for measuring the pressure.
In this tutorial, you’ll learn about the TCS230 sensor and how to use it with Arduino to recognize colors.
OK! There's the color codes but small as they are we can use a simple "ohmmeter" that just gives us the value with a single move.
Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...
The built-in electronic components from an old Canon scanner/printer result in real maker delights.
This is a project about a SCARA arm which is controlled by a joystick and which sends the position by a Bluetooth module.
by Fil2002 and EnricoTesta2002
Or connect with your social account:
New here? Create an account