Here is my first step to crete the clock based on *x8 LED matrixes
Project in progress by mdraber
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
A connected protective visor which helps to respect preventive measures against COVID-19.
Project in progress by Team Yayi Make
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Project in progress by srolf
Robotic arm controlled by bluetooth controller.
Project in progress by Basso&Delmoro&Gramaglia
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Project in progress by Ankel2000
The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.
Project in progress by Chrisy | Variint
This project focused on the calculation of machine efficiency along with various parameters visualized on IBM Watson IoT platform.
Project in progress by Pratik Roy
This Arduino-based machine will always prepare perfect Argentine mate (traditional infused drink).
Project in progress by Roni Bandini
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Tejas Shah
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Light and presence detector project to properly control LED bulbs automatically.
Project in progress by Joaquim Silveira
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
We're developing a prototype for a cheap and easy-to-use probe with a potential application in detection and monitoring of cancerous tissue.
Project in progress by Team AccuPatch
An Arduino-based altimeter, mostly for model rocketry.
Project in progress by M4K3R_4_M4R5
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
This project will show you how to make an automated watering system and water level indicator.
Project in progress by Saikan45
This 12 pushbutton piano plays the 4th octave with an optional added 3rd and 5th octave, controls note length and pitch with two pots.
Project in progress by fr_pal
Or connect with your social account:
New here? Create an account