Pluto is a 2WD Bluetooth car on which is placed a self-balancing plane.
Project tutorial by CRISTIAN SARVIA and MatteoDanna
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
A basic robot using Arduino.
Project tutorial by Renga
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
Motor driver circuit with some power saving features.
Project in progress by Patel Darshil
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
Project tutorial by Shubham Shinganapure
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Project showcase by Team HomeSafety
With this simple Arduino project, you can servo motor using a remote control.
Project showcase by Electronic Clinic
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Vintage 1980s Nikko remote control RC car mascot.
Project tutorial by MarcoGPS
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
Project in progress by Rafath Bin Zafar
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
This is our new Bluetooth RC car - based on our favorite Arduino Uno!
Project tutorial by ardumotive
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
Or connect with your social account:
New here? Create an account