Pluto is a 2WD Bluetooth car on which is placed a self-balancing plane.
Project tutorial by CRISTIAN SARVIA and MatteoDanna
A basic robot using Arduino.
Project tutorial by Renga
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
Project tutorial by Shubham Shinganapure
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
Vintage 1980s Nikko remote control RC car mascot.
Project tutorial by MarcoGPS
A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
In this project, I will teach you how to make an obstacle avoiding robot that works with Arduino.
Project tutorial by Aarav Garg
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
This is our new Bluetooth RC car - based on our favorite Arduino Uno!
Project tutorial by ardumotive
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
Easy to build instructions for making the new Nematoduino mk2, an Arduino Uno-compatible robotic simulation of the C. elegans nematode.
Project tutorial by Nathan Griffith
You can use different appliances. This project will turn the DC motor on or off by clapping.
Project tutorial by Nakshatra401
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
Project tutorial by sharma_himanshu
Or connect with your social account:
New here? Create an account