A simple countdown timer that makes you wash your hands for at least 20 seconds.
Project tutorial by The Tech Lab
In this instruction, I will show how to make Nixie clock with Arduino by circuit which is as much simply as possible
Project tutorial by engineer2you
This small project shows the current data of coronavirus outbreak of different countries in realtime on a 2.4 inch TFT.
Project tutorial by hwhardsoft
One big digit, fully functional Arduino Nano clock.
Project tutorial by Mirko Pavleski
Making my own special gift for a 50th anniversary with NeoPixel and an Arduino Nano.
Project showcase by remnis
Car engine tacho connected to OBD2 plug.
Project tutorial by Projecter
Use your Arduino board and drive as many nixie tubes you want.
Project tutorial by Marcin Saj
This project will show you how to make a data displaying system using a TFT screen.
Project tutorial by MisterBotBreak
Simple word clock using 2812b leds.
Project tutorial by garysat
Use your Arduino Nano or Particle Photon board and build a binary Nixie clock with 18 x IN-2 Nixie tubes.
Set your alarm via Arduino's IoT Cloud and start your day right on time.
Project showcase by MoritzDornseifer
VFD tubes are a good alternative to Nixie Tubes, especially in retro clock projects. Read about how they can be used with an Arduino.
by Doctor Volt
Pixel and Play is an interactive game console based on a NeoPixel matrix and the Arduino Nano BLE Sense.
Project showcase by pixel-and-play
Making Nixie clock with Arduino UNO and opto-isolation chip only.
Make a Big LED clock with arduino and RTC module to make it as a Real Time Clock.
Project tutorial by SetNFix
This project uses and Arduino Nano, a DS1307 RTC, a 5V power supply, and three servos to display the time in a digital format.
This project will show how to display NIXIE tube by Arduino and Optocoupler chip only
This project will show you how to make a simple Clock using a RTC Clock and a LCD.
This project describes how to build a GPS data logger at a lower cost.
Project tutorial by yvesmorele
Make your own custom DRO that measures distance for lathes, milling machines, woodworking tools, cut-off saws and other purposes.
Project tutorial by PracticeMakesBetter
A simple stopwatch that can store up to 4 split times.
An ultra flat screen built out of single row of LEDs.
Project showcase by ArduinoKoen
Yes, you CAN load and display BMPs from that card reader on the back of your tiny TFT screen!
A variant on the wooden wine box dual MX7219 matrix chiming clock. Rotating time, date, temp, humidity, day with events and chimes.
Project tutorial by goveil1
Or connect with your social account:
New here? Create an account