Spectrino - Arduino devices that can be implemented on a wide spectrum of touch-free tinyML based housing and society systems.
Project tutorial by Dhruv Sheth
A TinyML based Medical device powered by Edge Impulse to predict Atrial fibrillation, AV Block 1 and Normal ECG with >90%.
Project tutorial by Manivannan
Smart hand sanitizer will take place of employee attendance system and temperature gun with smart notification and record data.
by Team SMD Innovation
Monitor patients sent to self-isolate with the coronavirus by collecting their temperature, heart rate and location with a wristband.
Project tutorial by Andrei Florian
Lora network based covid-19 patient monitoring device.
Project tutorial by Team iot-bangladesh
A machine that consists of a face mask sanitiser (using UV LEDs), an automatic hand sanitising machine and an ARM MCU that checks vitals.
Project tutorial by Guntas Singh
Safely control a UV-C disinfection light over Bluetooth.
Project in progress by Lingnan Entrepreneurship Initiative
This innovative CO2 monitor for schools and offices helps to keep the virus away with an all new, yet very familiar design, a Wall Clock.
Project tutorial by Markusthemaker
This uses AMG8833 and HC-SR04 to measure temperature and give an output to Alexa, AWS DynamoDB, 1.44" TFT and LCD with a NodeMcu.
Project tutorial by Team H@ck5treet B0y5
An Arduino project that disinfects elevators.
Project showcase by Jad Halabi
This device determines your prescription and acts as an eyeglass for various prescriptions while being in a small wearable form factor.
Project showcase by Varun Chandrashekhar
With the shortage of PPE throughout the world, BrillBox empowers individuals to safely sterilize and ultimately reuse their PPE.
Project showcase by Kevin Yang
A device that mounts on top of a traditional keypad and transforms it into a touch-free and bluetooth controllable one.
Project tutorial by Francesco Gritti
The Protector is a safety and automation system that can be used in shops, airports and other public places to enable a touchless interface.
Project tutorial by Ajay Vishaal
Or connect with your social account:
New here? Create an account