A quantum random number generator with a Cold War aesthetic.
Project tutorial by Nathan Griffith
Aria is a voice-activated robotic helper for my mom.
Project in progress by Dwayne Scott Kurfirst
Mechanical tulip sculpture that blooms with just gentle touch and can shine into any color of a rainbow.
Project tutorial by Jiří Praus
3-channel EMG allows to control individual fingers with very little delay.
Project tutorial by Dmitry Dziuba
An old CB transceiver is converted to the 50MHz amateur band using an Arduino Pro Mini, DDS, PLL and OLED display.
Project in progress by hvde
An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.
Project in progress by alirezasafdari and syamil_zaini
Showing my progress in building the dashboard and flight control systems,follow up on channel and github repo to keep track:
Project in progress by The Architect
Protect your flying machine!
Project in progress by RoboCircuits
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
An Arduino-based programmable light suit for dancers.
Project showcase by Annlee Fores and BadBOY
What'd it be to interact with people using 'social media features' in real life? There's a wearable that explores exactly that!!!
Project showcase by tuangt
Teach ALL kids the fundamentals of AI and machine learning, through games and hardware and software design.
Project showcase by Fryden-Learning
Gizmo is a surveillance robot that can be remote controlled by smartphone and voice when in hearing distance.
Project in progress by Doctor Volt
Introduction low-cost IoT device for mobility-impaired users.
Project tutorial by Enrico Miglino
The mycelium machine transmits binary data through a mycelium mesh in the Earth. It does this so by manipulating the pH levels.
Project showcase by Julian Hespenheide
WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.
Project in progress by RobinB
Monitor power supply and start emergency power generator in case of power failure.
Project showcase by Superfunk2000
A robot with omnidirectional wheels, which is controlled using a Ricoh Theta V Camera and Snips.
Project tutorial by Jaime Andres Rincon Arango
A humanoid arm + hand prototype made of balsa wood
Large scale kinetic light installation in the former cable factory.
Project showcase by VOLNA
An interactive wall that mixes exercise with games.
Project showcase by Natthakit KIMBAB Kang
Or connect with your social account:
New here? Create an account