Connect your door to the Cloud and open it from everywhere.
Project tutorial by Arduino_Genuino
Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.
Project tutorial by 3 developers
Make your own custom GoPRO shutter using a MKR1000 board, 3 buttons and 3 LEDs.
Wondering if your cat is sleeping all day or running around the hood? Check it out with this tracker!
A simple burglar alarm built using an ATtiny45. You can attach it anywhere and will it will inform when someone tries to steal something.
Project tutorial by Salman Faris
Smart Vent System will help you save energy by heating or cooling only the rooms that you need.
Project tutorial by Gabi Zuniga
Arduino micro with RFID unlock your computer. Set one or many RFID tag, and unlock your computer with your personal password.
by Giovanni Gentile
A solar powered, cloud-connected device to dispatch annoying summertime pests efficiently.
Project tutorial by Mitomon
This project uses RFID to log in or out of a Windows PC using Arduino Pro Micro and MFRC522 module.
by MUVARA- The Idiots
This project creates a relay and a water pump for monitoring moisture.
Project showcase by Ingo Lohs
Store your password in a little, Arduino-based digital wallet. Easily log into your favourite social accounts.
Project tutorial by Giovanni Gentile
This is the next step with an Ultrasonic HC-SR04 Echo and LCD 1602.
Project tutorial by Ingo Lohs
When you have a 'real' Christmas tree, it is important to keep it watered. This project monitors the water level and emails alerts.
Project showcase by Ian Zahn
At my age you have to get up at night and tend to be tired on the way to the bathroom. Use a PIR-Sensor to trigger the light on!
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
The purpose of the project is to create a system of selective opening of shop windows.
Low cost, easy build pick to light system.
Project tutorial by PAJ
è un automazione di un braccio pneumatico in grado di smistare il legno da ferro
Or connect with your social account:
New here? Create an account