Basic code to make Arduino communicate with ILI9341.
Updated version of my Arduino stopwatch project. New code, more accuracy and responsiveness!
Project in progress by LAGSILVA
This digital clock driven by Arduino is a fun emulator of 4-stroke engine where the digits of hours & minutes represent the pistons moving.
The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.
Project tutorial by plouc68000
Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level.
Display on Nextion display or Nokia LCD
Project showcase by petemnz
An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.
Project tutorial by SurtrTech
Dear friends welcome to another tutorial! In this video we are going learn how to build ourown menu for the popular Nokia 5110 LCD displa...
Project tutorial by Nick Koumaris
You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)
by Tamer Savaşcı
This project is about an Arduino running a digital clock, a stopwatch, and a timer simultaneously!
This alarm clock and timer work without the help of a computer. All the settings can be done on the clock itself and stored in the EEPROM.
Project showcase by ozyRonald
Build your Nixie Tubes display easy.
Project tutorial by GRA_AND_AFCH
In 1884 Nipkow invented a method to capture and view a moving image. This project uses the same disk to generate a moving digital image.
Project showcase by christopheArduino
In this tutorial you will learn how to visualize the motion of IMU (Inertial Measurement Unit) sensor, "MPU-6050 [6DOF]" in 3D.
Project tutorial by Aritro Mukherjee
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Project tutorial by Prasanth K S
This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.
Project showcase by Hugo Blanc
Arduino version of the early mechanical television, invented by Nipkow more than 100 years ago.
A clock, controlled by a RTC module, that you can see on a 4-digit display.
Learn how to use the 16x2 LCD with Arduino for various projects.
A weather clock with Arduino, RTC, DHT22 and BMP180.
Project showcase by Tittiamo
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
Project tutorial by Keval Doshi
This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.
Project tutorial by Igor Fonseca Albuquerque
Using two Seven-Segment Displays (SSD) simultaneously on an Arduino Uno Board to display numbers from 00 to 99, without charlieplexing.
An LCD buddy that reacts to you!
Project tutorial by aip06
This project will show you how to make with Arduino and 16X2 LCD
real time display from your computer.
Project tutorial by Youssef Sabaa
Or connect with your social account:
New here? Create an account