A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do it.
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated.]
Project in progress by Fransie Streicher and Kaamil-Inaam Naicker
When it sees you, it won't stop following!
Project tutorial by Little_french_kev
Arduino is used to measure frequency and duty cycle of pulses and display them on LCD.
Project tutorial by ambhatt
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
A simple sensor to measure conductivity changes in water and other materials!
by Jen Fox and Hacking STEM
Expand your board's storage with an I2C-enabled EEPROM chip.
by Arduino “having11” Guy
How to make a benchtop pH meter with an Arduino Uno and the Gravity analog pH sensor from Atlas Scientific.
by Atlas Scientific
This is for embedded software developers with a solid working knowledge of C or C++, but who struggle with large and complex projects.
Project tutorial by Lucky Resistor
Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
I will explain how templates work and how you may use them in your code.
Add an external S-meter on any Icom amateur radio transceiver that has a CI-V control port.
Project tutorial by ddufault
A simple circuit for measuring electrical current with Arduino.
Project tutorial by Giovanni Carrera
Calibrating Atlas Scientific's EZO pH sensor using Arduino Uno.
Allows an Arduino board to deal with keypad 3 * 4 using one wire.
Project tutorial by kaaoda
Calibrating Atlas Scientifc's EZO D.O sensor using Arduino Uno.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
by Inventor Niv
In this project, we will learn to build an IR sensor module with transistor and an Arduino as well.
Project tutorial by Manikant savadatti
How to connect multiple Atlas sensors to a single Arduino serial port.
A simple project, involving transferring value of a sensor, which is connected from one Arduino to another, and getting a required result.
by Chandran N
Sometimes you need to generate a analog signal from a digital source a DAC or a digital to analog converter helps you do this.
by Vimanse Dissanayake and Chathura Yapa Bandara
Or connect with your social account:
New here? Create an account