We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.
Project showcase by Michele
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
Arduino UNO-compatible robotic simulation of the C. elegans nematode.
Project showcase by Nathan Griffith
Mobile-controlled CNC plotter.
Project in progress by Fakhr El-deen Gamal and Mohamed Sami
Robot that drives around autonomously in greenhouse environment and identifies diseases.
An automatic DIY photography turntable for all the techie photographers out there.
Project tutorial by circuito.io team
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
Project tutorial by AhmedAzouz
Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).
Project showcase by joechen
A version of the RC Car that uses Remote Arduino to allow a Windows device to control the motors without using an external motor shield.
Project tutorial by 4 developers
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Project in progress by ihacklab
The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.
Project in progress by Jeremy Dunham
A 3D-printed brain-controlled prosthetic arm.
Project showcase by Ayush Kapur
Let’s ship them all!
Project showcase by Team SUAI/IHPCNT
A 2-in-1 CNC machine with both a rotary tool and a laser module.
Project showcase by Arnab Kumar Das
Solder your PCBs using a DIY robotic arm.
Use PHP and MySQL to control a machine that will retrieve parts so you no longer have to dig for that 330 ohm resistor!
Jrobot Delivery is ready to deliver your next pizza!
A 3D printed robotic arm, controlled through an Arduino, also being 3D rendered in Python OpenGL, using the Ci20 board.
Project showcase by Samuel Jasmer
Python does the image processing, Arduino controls the servos.
Project tutorial by WolfxPac
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
Or connect with your social account:
New here? Create an account