In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Team Hermes
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Avoid conflict with other libraries, use ServoTimer2 and run servo motors with ease.
Project tutorial by ashraf_minhaj
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Have you ever wanted to be able to control a car with your hand? Introducing the Motion Mobile!
Project tutorial by mcharrison500
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
Let's learn how to control a Roomba Robot via its serial port and how to command its motors, LEDS , etc.
Project tutorial by MJRoBot
Using the Actobotics Runt Rover Peewee chassis kit and an Arduino controller, motor driver and sensors from eBay or other vendors.
Project tutorial by Scott Beasley
Or connect with your social account:
New here? Create an account