This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in initial state.
Project in progress by Rafath Bin Zafar
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Team Maverick
When my ultrasound sensor stopped working, I decided to improvise by making an obstacle avoidance bot using IR sensors (cheaper too).
Project tutorial by Chandran N
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Hermes
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
by Shubham Shinganapure
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by RobotGeek Projects Team
This project will show you how to make a laser turret.
Project tutorial by MisterBotBreak
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Project showcase by Team HomeSafety
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
What if a regular M&M's dispenser was changed to automatically serve the chocolate candies? Let's go for it!
Project showcase by Marcelo Ávila de Oliveira
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
This lesson aims to show how an H bridge works.
line following robot setup using an L298N motor driver with an Arduino and two proximity sensor modules.
Project tutorial by Arnov Sharma
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
Duffy the mobile robot moves alongside you connected through a "light leash" and alerts you of objects around the path.
Project tutorial by Daniel Martin
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
Most 6DoF robotic arms come with a control board with RS-232 for desktop control, we adapt the control for use with android devices simply.
Project in progress by Mans
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
Or connect with your social account:
New here? Create an account