We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
A mini CNC machine made out of cheap materials with a stunning result.
Project showcase by Mr-M
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
Project showcase by Mrinnovative
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
This project shows how to control a 6DOF robot arm via web.
Project tutorial by phpoc_man
Diversity Adaptive Obstacle Avoiding Robot
Project showcase by Maverick
Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.
Project showcase by Michele
This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
Project in progress by Andriy Baranov
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
KureBasArm is a robotic arm that can movable from mobile phone manually or by sensors from your phone. You can record and play your movement
Project tutorial by KureBas Robotics
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.
Project showcase by Gabry295
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
This project shows you how to build a cheap and easy, but very small CNC(Plotter) using Arduino UNO.
Project tutorial by Zain Shahwar
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
What about using a Wi-Fi remote-controlled robot for exploring your surroundings, reaching inaccessible places, spying and take pictures?
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
Arduino UNO-compatible robotic simulation of the C. elegans nematode.
Project showcase by Nathan Griffith
Or connect with your social account:
New here? Create an account