We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
This project shows how to control a 6DOF robot arm via web.
Project tutorial by phpoc_man
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
This project shows you how to build a cheap and easy, but very small CNC(Plotter) using Arduino UNO.
Project tutorial by Zain Shahwar
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
What about using a Wi-Fi remote-controlled robot for exploring your surroundings, reaching inaccessible places, spying and take pictures?
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
A vehicle measures distance with an encoder on its wheel. It is remotely controlled and transmits the distance via Websocket.
Project tutorial by Matthew Lee
A Bluetooth-enabled RC Car that uses Remote Arduino to allow another Windows device to control it.
Project tutorial by Team Windows IoT
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
A homemade CNC machine for cutting PCBs.
Project tutorial by Rui Fernando Caldas
Operate inaccessible and remote devices using a smart glove from anywhere on Earth.
Project tutorial by Nero
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
Project tutorial by Andriy Baranov
A solar panel that can rotate in two axis either automatically using four light sensors, either manually with the aid of two potentiometers.
Project tutorial by Giannis Arvanitakis
I designed this stepper motor with eight electromagnets, six neodymium magnets, with a 3d printed rotor and stator housing.
Project tutorial by Anthony Garofalo
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
Project tutorial by AhmedAzouz
Or connect with your social account:
New here? Create an account