Sound sensing, navigation, and obstacle detector.
by Smart Creativty
Give the axis of an inkjet printer a new job.
by Ingo Lohs
In this article we discuss about how to Servo motor interface with Arduino Uno
by Akshay Joseph
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.
by RobotGeek Projects Team
NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.
by Andriy Baranov
Interface board capable of communicating an Arduino board or any microcontroller to the Dynamixel motors.
by Josue Alejandro
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...
In this arduino project, We use a temperature sensor LM35, to control the speed of the Servo motor.
This is a project about a SCARA arm which is controlled by a joystick and which sends the position by a Bluetooth module.
by Fil2002 and EnricoTesta2002
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.
Arduino UNO-based, two-axis linear slider with centering function and Bluetooth remote control from an Android app.
It is the next generation of remote control cars where signal attenuation is completely out of the picture.
by VISHAL SIVARAMAN
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
In this project, I will show you how to make a low cost and high power motor driver using relays, NPN transistors and resisters.
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
iRobbie is the revolutionary app that brings smartphone power to your Arduino project.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
What you need to control the motors of your robot? H-Bridge is the magic word!
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
Or connect with your social account:
New here? Create an account