An Arduino UNO large clock on a 16x2 LCD display shield with the ability to change hours and minutes.
Project showcase by Arduino World
Ever want to control an 8x8 LED Matrix? Here is a controller that can help.
by David A Riewe
These 84 by 48 pixel LCDs are what you might have found in Nokia 3310. And what about using them in the Arduino projects?
This project demonstrates how easy it is to display temperature information on a Matrix Orbital GTT HMI using a DS18S20 and an Arduino Uno.
Project tutorial by MatrixOrbital
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
Project in progress by LAGSILVA
This small PCB lets you learn Morse code and communicate with friends. Set up a telegraph network in your very own home!
Project tutorial by Alex Wulff
This lesson is about interfacing LCDs with Arduino.
Pick the time from a DCF77 radio signal and show it on an OLED display.
Project tutorial by Edwin Martin
Display the results from the HC-SR04 ultrasonic sensor on an LCD display using 433MHz transmitter and receiver.
Project tutorial by mcharrison500
You will learn how to create a Human Machine Interface with Arduino and LCD 16 x 2.
Project tutorial by PCBWay and Silícios Lab
This project connects the ADLX345 3-Axis accelerometer to display a location on an 8x8 LED matrix using the MAX7219 LED driver chip.
Project tutorial by Reid Paulhus
Very simple clock, that looks great!
Project showcase by Sahaj Sarup
This tutorial shows you an easier way to control an LED dot Matrix from an Arduino board.
Project tutorial by Arduino_Scuola
Arduino clock, easy to assemble, you can set the date and time by the Serial monitor
by Team Vinicius Lopes
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
Project showcase by OliB150
Wanna play with some graphic or make a touch interface? Use this DFRobot's Touch Shield for Arduino UNO!
With photocells in both goals and a bright LED-display on the table, a USB powerbank provides action for at least 30 hours.
Project showcase by OSZ Täuffelen
Using SD Card and 16x2 LCD module.
Project tutorial by moty
Charlieplexing extends the limitation of I/O pins of a controller beyond its capability.
Project tutorial by Lilanka Udawatta
I will use a seven segment display and an arduino to wish my friend a Happy birthday !
by Akash Ravichandran
Wire a 16x2 LCD.
Project showcase by ThomTronics
arduino-based clock with LED rings
Project in progress by Pierre
Hooking up an old SONY CRT viewfinder to Arduino.
LcdProgressBar displays a progress bar in LCD display.
by Wilfried Loche
Or connect with your social account:
New here? Create an account