A beginner project utilising an Arduino and a BME280 sensor capable of giving you 4 environmental readings.
by Electorials Electronics
Building a rain sensing alarm with Arduino.
by Smit Babariya
This is an image processing based fire detection and extinguisher system using Arduino and OpenCV.
by Shubham Shinganapure
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by Team AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
You can close your eyes, but you cannot close your ears.
Project tutorial by Nekhil ravi
This smart stick can help blind people walk on the street safely without any help.
Project tutorial by hadi1234
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by lamaripalma and e-structure_UNO
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
This little project will show you how to use a soil moisture sensor.
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.
Project tutorial by Sridhar Rajagopal
This Bolt IoT-based project shows how to build a metal detector alert monitor.
Project tutorial by shashi shekhar
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.
Project in progress by Esther He
Or connect with your social account:
New here? Create an account