Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
An easily customizable Geiger Muller counter.
Project tutorial by juliandwillett
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
You can close your eyes, but you cannot close your ears.
Project tutorial by Nekhil ravi and MANO
This smart stick can help blind people walk on the street safely without any help.
Project tutorial by hadi1234
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
How to use the small module to measure distance for high frequency applications... or low.
Project tutorial by SurtrTech
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
How I built an Arduino energy monitor and data logger to collect energy data for different loads and plotted that data using Excel.
Project tutorial by Sridhar Rajagopal
This Bolt IoT-based project shows how to build a metal detector alert monitor.
Project tutorial by shashi shekhar
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Track the sun in X and Y with this simple Arduino project.
Project tutorial by Brown Dog Gadgets
+ OLED display, measures in imperial and metric.
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
Or connect with your social account:
New here? Create an account