It came with only an on/off switch. Adding an UNO to this LED chalkboard really gets your attention - it is quite a flashy pig.
Project in progress by ArduBacon
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Board for sensing voltage /current air temperature and motion via I2C and being sent to Librato for monitoring.
Project tutorial by Jade Perreault
You can check in to home / office or even your grandma's house by simply walking in front of an ultrasonic sensor.
Project showcase by Guest
SwagProtocol is a header-only Arduino library that makes it super easy to add a JSON formatted communication protocol to your projects.
Project showcase by nwags
In this tutorial, you will post a tweet with a push of a button through Arduino.
Project showcase by Amr Saleh
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
by Dragos Iosub
Library to use I2C PCF8575 IC with Arduino and ESP8266. This IC can control until 16 digital devices like button or LED with only two pins.
by Renzo Mischianti
Taking an Arduino Uno, one display, one Hall sensor and four magnets, i measured how many meters run my little hamster named "Ciambella."
Project tutorial by Franzduino
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This ball mill was made for grinding sand and cleaning objects like rusty bolts.
Project showcase by tinkersprojects
To get my entry pass to our #Seeed10 Annual Party, I weaved out an owl that has two huge light up eyes as my light-up project.
Project tutorial by Meilily Li
Randomly select from the 64 LED of an 8x8 matrix. Once a predetermined percent of the total have been selected, display the stats in colors.
Project tutorial by scott mangiacotti
It's a simple LEGO traffic light.
Project showcase by matteoPrada
Want to get notified in case your mom storms into your room? I will help you in this project with the help of 1Sheeld.
Project tutorial by Ensaf Atef
Make a Santa Claus that talks, sings, and takes selfie photos whenever someone passes by him.
Project tutorial by amrmostaafaa
A pseudo theremin using the HackingSTEM finger sensors.
Project showcase by Gergely Nádori
Project showcase by Konstantin Dorohov
Dump that retro joystick and join the 21st Century.
Project tutorial by Bobbs
Time to bring the Atari 800 into the 21st Century.
Its a RGB led controlling using a Processing IDE visualizer. As we move the cursor from visualizer the color of RGB led will change.
An overview of the 8x8 LED Matrix with a HT16K33 backpack. I will go from wiring to having some fun with it.
Project tutorial by sharma_himanshu
Or connect with your social account:
New here? Create an account