This is a quick night light that uses PTH LED bricks to light up when it gets dark!
Project tutorial by Lunchbox Electronics
The short project for beginners to get some practice in using LED lighting with the sound sensor.
Project tutorial by Mantas Utka
A model lighthouse, built with 3D printing, using an Adafruit NeoPixel Ring for the lights.
Project tutorial by Jeremy Lindsay
The classic whack-a-mole game using LED lights and a joystick.
Project tutorial by courtlandjensen
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
This is my project about an Analog Clock on a LED matrix and Arduino.
Project tutorial by LAGSILVA
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Project tutorial by HeathenHacks
The LED sequencer is an easy project for beginners to learn how LEDs work.
Project tutorial by Team thefantasticode.Group
A fun, interactive project for makers new to Arduino. Control the brightness of an RGB LED with Potentiometers, with on/off switch built in.
Project tutorial by FIELDING
Simulate a traffic light using an Arduino and LEDs! This project is super cool to watch and easy to make!
Project tutorial by Zachary Haslam
Ten LEDs connected to an Arduino Uno and a potentiometer.
Project tutorial by Tech with Matthew
Light sensor and output on fading LED on a PWM pin
Project tutorial by Nikola Travis
Its a RGB led controlling using a Processing IDE visualizer. As we move the cursor from visualizer the color of RGB led will change.
Project tutorial by alaspuresujay
Build a proximity sensor using aluminium foil and a high value resistor.
Project tutorial by Amal Mathew
This is an original ternary digital clock running with Arduino! It's very simple and unlike anything you've ever seen!
LED emergency lights for use on model / toy vehicles and other projects. Uses Arduino UNO and GY-WS2812B-8 RGB LED Module from DIYmall.
Project tutorial by bigboystoys13
Snap Circuits® makes learning electronics easy and fun! These projects are designed for younger kids who want to get introduced IoT.
Project tutorial by Daniel Porrey
Because LED are fun - but addressable rocks. :)
Project tutorial by Tal O
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Project tutorial by Arnov Sharma
Color detection with Arduino and smartphone - output on RGB LED using 1Sheeld color sensor.
Project tutorial by Mr robot Maker
Every birthday is special. So that the party is remembered, the table decoration plays an essential role. Look at this.
Project tutorial by Thomas Angielsky
Do you know of the famous WS1012 LEDs? The PL9823 is the cheapest LED that uses the same protocol of the WS1012. Let's blink LEDs!
Project tutorial by Giovanni Gentile
Using Arduino, LED's, and Paper we can make easy and cool Christmas lights that can take the shape of anything.
Project tutorial by Team FunguyPro
Or connect with your social account:
New here? Create an account