It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
This project shows you how to build a cheap and easy, but very small CNC(Plotter) using Arduino UNO.
Project tutorial by Zain Shahwar
Tired of controlling your robot with a joystick? Ever thought of controlling it with your hands?
Project tutorial by Mayoogh Girish
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
A Bluetooth-enabled RC Car that uses Remote Arduino to allow another Windows device to control it.
Project tutorial by Windows IoT
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
It's a basic 4-wheel drive car which can be controlled by Android phones.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
A self-driven robot car that can detect and automatically avoid obstacles that it hits or gets in its way.
Project tutorial by Darwin Dela Cruz
A homemade CNC machine for cutting PCBs.
Project tutorial by Rui Fernando Caldas
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
What about using a Wi-Fi remote-controlled robot for exploring your surroundings, reaching inaccessible places, spying and take pictures?
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
Project tutorial by Andriy Baranov
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
Or connect with your social account:
New here? Create an account