The ball and beam system is a popular textbook example in control theory and nonlinear dynamics.
Project tutorial by 3 developers
It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.
Project tutorial by Luis Eduardo Arenas Deseano
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Alberto Perez Guillen
A relatively easy to build and quite cheap robotic arm.
Project tutorial by Mirko Pavleski
If you have this car, you will be able to avoid obstacles and follow the necessary lines to reach your destination and protect the distances
Project tutorial by TheTNR
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
A light-tracking turret based on two stepper motors - can rotate about 90 degrees in the vertical and 180 degrees in the horizontal plane.
Project tutorial by CesareBrizio
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
Solder your PCBs using a DIY robotic arm.
Project tutorial by AhmedAzouz
We will try to make a simple CNC machine with you.
Make a simple robotic arm which has master - slave control, and can record and play the moves.
Project tutorial by WolfxPac
Python does the image processing, Arduino controls the servos.
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
This robotic arm mimics hand motion and works using sensor and moves accordingly. Can be used in industry for welding and various jobs.
Project tutorial by Ashwini kumar sinha
I want to make a robo arm with less cost which draw cute pictures. That robot want to make my Daughter happy and it can able to dance. I ...
Project tutorial by jegatheesan
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
Control your robotic arm from long distance using Ethernet.
Project tutorial by Md. Khairul Alam
Robo Hazel is a robot prototype made using Arduino and WIZnet S2E module to advance industry 4.0 and solve the problem of message delivery.
Project tutorial by Hamza Khalid
Operate inaccessible and remote devices using a smart glove from anywhere on Earth.
Project tutorial by Nero
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
An automatic DIY photography turntable for all the techie photographers out there.
Project tutorial by circuito.io team
Use PHP and MySQL to control a machine that will retrieve parts so you no longer have to dig for that 330 ohm resistor!
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
Or connect with your social account:
New here? Create an account