Writing in a 4 digit 7 segment LED display.
A simple Arduino clock without RTC module for beginners.
Project in progress by Annlee Fores
Alarm Clock with Arduino.
Here, you will learn how to use TFT LCDs by Arduino. From basic commands to professional designs and technics are all explained here.
The simplest Arduino LCD clock ever designed. Only needs an Arduino UNO, a 1602 LCD, and two buttons. No resistors, no potentiometer.
Project tutorial by plouc68000
Basic code to make Arduino communicate with ILI9341.
Want to display text? Here is your component!
In this tutorial, you will learn how to use and set up 2.4″ Touch LCD Shield for Arduino. Basic setup to a paint app!
Using two Seven-Segment Displays (SSD) simultaneously on an Arduino Uno Board to display numbers from 00 to 99, without charlieplexing.
Interface a 16x2 Liquid Crystal Display with Arduino Uno. Here we just use 4 wires.
by Akshay Joseph
In this article, you will learn how to run OLEDs by Arduino, and display text, images, and animations on them.
This is how to make your own LCD timer, just with an Arduino, a LCD screen and some hook-up wires.
Project showcase by Hugo Blanc
You can communicate your Nextion LCD with your Arduino UNO by Software serial ... a liitle tricky but not much :)
by Tamer Savaşcı
A guide on how to use the OSEPP LCD and keypad shield.
Project tutorial by Joe
This project will show you how to make with Arduino and 16X2 LCD
real time display from your computer.
Project tutorial by Youssef Sabaa
A clock, controlled by a RTC module, that you can see on a 4-digit display.
Digital clock with Arduino using Shift Register (74HC595), real time clock, temperature and humidity sensor and 7 Segments display.
Project showcase by LAGSILVA
An alarm clock using a DS1302 RTC and a buzzer. You can set the RTC by a keypad as well as set the alarm.
Project tutorial by SurtrTech
First, we will simply show some data on the screen. In the second example, we will show DHT22 sensor data on the LCD.
This tutorial shows how to control an array of 8x8 LED matrices using an Arduino Uno, to create the face of a robot.
Project tutorial by Igor Fonseca Albuquerque
This project is about an Arduino running a digital clock, a stopwatch, and a timer simultaneously!
You can upload your design to your Nextion LCD with USB UART. No need to use an SD card. Fast and easy.
A very easy Genuino UNO project with LCD and DHT11 temp. and humidity sensor. The LCD shows the temp., humidity and other infos.
Project showcase by interpeo
A little tutorial to make a digital photo frame, and also use the touch functions to navigate between images.
Or connect with your social account:
New here? Create an account