The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Bicycle odometer and speedometer showing distance traveled, average and current speed (in km/hr), time and can store up to 99 laps.
Project in progress by alan_dewindt
Outside precision thermometer, based on B+B Thermo Technik Precision temperature sensor TS-NTC-103, 10 kΩ.
Project tutorial by Peter Groeneveld
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
This project is an Arduino radar. It is a simulation of a radar.
Basic weather station with DHT11 sensor, Arduino, BLE Shield and iShield App.
Project tutorial by Victor Carreño
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
A feedback control system which can control the given fluid level and display us the water level in a tank.
Project tutorial by Rushabh Jain
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
Project showcase by Team Technozz
There are many things you can doo with a Hall sensor and magnetism.
Project tutorial by SURYATEJA
In this tutorial, I will be giving the basics for an ultrasonic thermometer and the idea behind it.
Project showcase by berkeralpz
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by Team AeroGeeks
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can get GPS / NMEA data from it.
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
Worried about the quality of air around you? This project will help you monitor the air pollution levels in your surroundings!
Project tutorial by circuito.io team
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
This project consists of monitoring the level of water in two tanks.
Project tutorial by zezarandrade
Here we measure rainfall.
Project showcase by Mahamudul Karim Khondaker
Create a DHT11/DHT22 breakout board for your Raspberry Pi running Windows 10 IoT Core using an ATtiny85.
Project tutorial by Daniel Porrey
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
Developing and mounting sensors on a bike.
Project showcase by Vikram Tokala
This project shows how to use MATLAB and Arduino to acquire and fix data from a bundle of DHT22 sensors, live plot, and export the results.
Project tutorial by dancili
SPACS is an invisible shield for pedestrians designed as an extra safety measure in case of collision or vehicle malfunction.
by Marius Dima
This is my fourth tutorial focusing on Scratch and physical computing.
Project tutorial by MJRoBot
Or connect with your social account:
New here? Create an account