Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
How to measure heart rate with an Arduino.
by Ingeimaks Ingeimaks
Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.
Project tutorial by Protocentral
This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.
Project tutorial by Team Technopaths
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Project tutorial by HRMS
Using AI to detect dangerous bacteria and harmful particles in the water.
Project tutorial by Clean Water AI
Get your heart rate, not just an IR sensor reading.
Project tutorial by Johan_Ha
I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.
Project showcase by Zorzonel Vlad
Make an Internet Radio with the mdp music player.
Project tutorial by Anthony Kelly
A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!
Project tutorial by 3 developers
Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.
Project tutorial by Team ProtoCentral
Getting some information from human body by using simple sensors and Arduino.
Project tutorial by ElectroPeak
Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.
Project tutorial by Diana Khalipina
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
I created an electrocardiogram using TouchDesigner. The image moves according to the value of the sensor connected Arduino.
Project tutorial by HomeMadeGarbage
In this project we show how we made a single-lead ECG monitor for heart-rate variability using the MAX30003 and an Arduino Uno.
Project showcase by ProtoCentral
Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!
Project tutorial by David Escobar
Help blind people navigate on their own by detecting obstacles
Project tutorial by soumil shah
An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.
Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.
Project in progress by jpaulmrphy
E-health Prototype System for Cardiac Telemonitoring "Caring your heart anywhere"
Project in progress by Laura Juliana Vargas Escobar
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by MEGA DAS
Baby monitor that can also help put your baby back to sleep.
Project tutorial by Kirollos Magdi Sobhy
Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.
Project showcase by David Escobar
Or connect with your social account:
New here? Create an account