With the recent loss of the Samsung SmartShield I have created a replacement solution using the Arduino Wireless Shield and an Xbee S2C.
Project in progress by CR76
A smart IoT and machine learning based public address system.
Project tutorial by Tejpunj Raju
Use circuito.io to build a smart food dispenser for your pet controlled directly from your phone.
Project tutorial by circuito.io team
Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
by Timothy Woo
My lightweight Arduino GSM mobile phone.
Project tutorial by Avishek
Sending and Receiving data with nRF24L01+ using only 3 pins of ATTiny85.
Project tutorial by Arjun Ganesan
ESP8266 ESP-01 chip provides a really low cost and effective way to communicate over the internet.
by Robin Kanattu Thomas
Using Arduino to do a communication between sensors and Windows for IOT
Project tutorial by Christiano Faig
Smart Garden is a plant environmental monitoring system.
Project showcase by patel Dipen
This is a guide on how to set up and use the very inexpensive ES8266 Breakout Board with an Arduino instead of a serial programmer.
by Josh From BreakoutBros.com
Send and receive real SMS text messages with your Arduino! A self-contained texting device with its own SIM card and phone number.
Project tutorial by Mike Schaus
RFID to Ethernet (Telnet), connect your Rfid reader to the internet
Project tutorial by David Smerkous
Controlling a car using a Pebble watch, an Android phone and an Arduino
Project tutorial by Mika Wee
This is a tutorial to show you how to connect to Blynk using an ESP8266 - 01 as an Arduino Uno wifi shield.
Project tutorial by Nolan Mathews
The communication between the cell phone and the Arduino BT board is wireless. Additional devices can be connected into the system.
Project tutorial by Team Brink.IO
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Use a Bluetooth module to replace a traditional wired connection for transmitting serial data.
Need a quick way to monitor the soil moisture level of your favorite fern? Look no further. We have the answer.
Project tutorial by Mark Phillips and Peter Main
Tutorial on how to building an IR Bridge with the SmartThings ThingShield
Project tutorial by Juan Pablo Risso
This powerful cellular shield can easily turn your project into a full-fledged phone with voice, SMS, LTE data, GPS, and more!
When drawing on web, the drawing will be sent to XY plotter to re-draw it on bigger screen.
Project tutorial by IoT_lover
This is a quick implementation project using a ESP8266 WiFi module and recording temperature and humidity (DHT22) on Thingspeak channel.
Project tutorial by Hernanduino
Get an alert via email when the water level reaches a critical threshold.
Project tutorial by Vinayak Shantaram Joshi and Pranav Kundaikar
Universal Windows App that connects to an embedded Bluetooth device over the Bluetooth Serial Profile using a generic Bluetooth USB dongle.
Project tutorial by David Jones
Or connect with your social account:
New here? Create an account