A project that uses SG-90 Micro Servos to shoot Lego cannons, because why not.
Project tutorial by ShreyanR
This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick.
Project tutorial by BEASTIDREES62
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
GRBL and CNCJS Tutorial
Project tutorial by Arnov Sharma
Arduino-Android car controlled via Bluetooth module.
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
line following robot setup using an L298N motor driver with an Arduino and two proximity sensor modules.
It's a BLDC motor based jet turbine.
It's an Arduino-based robot which brings food from the kitchen to my room.
Do you want to build a Robot that can walk dance and sing for you! Then this is the ultimate guide that can help you through.
Project tutorial by MEGA DAS
Do you want to create your own robot? Then this is your best guide. This is a smart robot controlled by an Android app so easy to build.
Digital calendar clock using Arduino Uno, I2C LCD and 1307 RTC module.
Project tutorial by Akshay Joseph
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project showcase by Team Maverick
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
With this simple Arduino project, you can servo motor using a remote control.
Project showcase by SmartTronics
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
CNC machine control with GRBL breakout board for Arduino Uno.
Project tutorial by Team CNC Design
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
Give the axis of an inkjet printer a new job.
by Ingo Lohs
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by YASH36
In this article we discuss about how to Servo motor interface with Arduino Uno
by Akshay Joseph
Or connect with your social account:
New here? Create an account