Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
Let's learn how to control a Roomba Robot via its serial port and how to command its motors, LEDS , etc.
Project tutorial by MJRoBot
CNC machine control with GRBL breakout board for Arduino Uno.
Project tutorial by CNC Design
Small four wheeled bots are fun to build and play with, but offer a new set of challenges for the beginner. With the addition of two more...
Project tutorial by Scott Beasley
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
Arduino-Android car controlled via Bluetooth module.
This is a small robot car which can be controlled over Bluetooth using Android devices.
Project showcase by S.Ranjith Reddy
In this low-cost project, you can learn fun stuff like laser cutting, coding, mechanics, trigonometry. No Arduino codes required!
Project tutorial by KittenBot
Most 6DoF robotic arms come with a control board with RS-232 for desktop control, we adapt the control for use with android devices simply.
Project in progress by Mans
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
What you need to control the motors of your robot? H-Bridge is the magic word!
This is how to control Robot Arm using Mobile Application which is really cool, have fun and please give me feed back.
Project tutorial by Ammar Atef Ali
Avoid conflict with other libraries, use ServoTimer2 and run servo motors with ease.
Project tutorial by ashraf_minhaj
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Or connect with your social account:
New here? Create an account