Ever want to just stay in your warm bed on those cold, dreary autumn mornings? Now you can!
Project tutorial by Team RobotGeek Projects Team
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
by Shubham Shinganapure
An easy Bluetooth controlled toy car.
Project showcase by Francesc0
This creates a rotating platform for displays.
Project tutorial by Ingo Lohs
Build a battlebot from cardboard using Arduino.
Project showcase by Ikhsan Ismail
Electronic Arm Prosthesis
*Carolina Proaño Photo
Project tutorial by Team Inti Condo
I built a leg with Arduino and with ice cream sticks!
Project showcase by fmattiussi
This project is a mechanical clock using an Arduino uno, and servos to move hands around the dial.
Project showcase by garysat
Do you want to build a Robot that can walk dance and sing for you! Then this is the ultimate guide that can help you through.
Project tutorial by MEGA DAS
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by YASH36
This project is saving time for all parents who hate to change batteries or other mechanisms for the merry-go-round above their baby's bed.
Project showcase by ivanzlatni
This ball mill was made for grinding sand and cleaning objects like rusty bolts.
Project showcase by tinkersprojects
GRBL and CNCJS Tutorial
Project tutorial by Arnov Sharma
Additional system for Delta-Robot One to transport things into the robots workingspace
Project tutorial by deltarobotone
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
Interface board capable of communicating an Arduino board or any microcontroller to the Dynamixel motors.
by Josue Alejandro
Project tutorial by sharma_himanshu
Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.
Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.
by Infineon Team
Or connect with your social account:
New here? Create an account