There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
Attempt to build an ultra-low cost molecular reactor, using computer controlled recirculating air.
Project in progress by Jim Haseloff
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Project in progress by philippedc
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]
Project in progress by Fransie Streicher and Kaamil-Inaam Naicker
Shows to visually impaired or ignoring the resistors colour code, lazy techs etc..., either the exact value or value in E12 or E24 series
Project in progress by rafu
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
Rodent behavioural test equipment is key for biological research yet expensive - our team is developing a low-cost alternative
Project in progress by 3 developers
An old CB transceiver is converted to the 50MHz amateur band using an Arduino Pro Mini, DDS, PLL and OLED display.
Project in progress by hvde
A raspberry pi based cereal phenotyping device
Project in progress by MacroImager
Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.
Project in progress by Turai Botond
This device runs a desired length and quantity of wires and cuts each length.
Project in progress by 30percent
I want to make a spot welder for battery packs or other stuff that cannot be soldered.
Project in progress by Westpol
I want to make a CD spot welder for battery packs or other stuff that cannot be soldered.
This is a library that allows any machine or robot to be controlled by G-code.
Project in progress by tinkersprojects
An open microbial bioreactor for growing cultures of about 1L.
Project in progress by Open Bioeconomy Lab
DMX512 tester display / receive or transmit the level of 1 of 512 DMX control channels.
Project in progress by KevinMcArthur
BBC Micro connects to WiFi, accesses games over the Internet.
Project in progress by 8bitkick
A sensor-pump system which would be able to adjust drug output of aminoglycosides based on real time sensing of drug in plasma.
Project in progress by Biomaker Challenge 2017: Team 14
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
A high power and highly programmable smart battery charger, LED driver and programmable DC source all in one.
Project in progress by PowerShield0621
The Arduino world offers a ton of H/W options and excellent S/W. Making a real industrial project out of it... not so easy.
Project in progress by Ed Caceres
Universal IR receiver and transmitter for home automation and replica of any IR remote control (air conditioners included); uses WAMP.
Project in progress by msillano
This is the "Sensometer", a great example of IoT! Get all sensors working at once!
Project in progress by Neoxelox
Or connect with your social account:
New here? Create an account