A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.
Project showcase by Nick Romeo
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
Project showcase by Mrinnovative
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
How to make a remote-controlled origami robot with Arduino.
Project showcase by isangmu
A mini CNC machine made out of cheap materials with a stunning result.
Project showcase by Mr-M
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Project showcase by Arnov Sharma
A miniature three degrees of freedom robotic arm that you can even record the movement and loop it!
Project showcase by Ooi_Yan_Liang
It is about a robotic arm of 3dof + 1 controlled by arduino and visual basic that plays tic tac toe game against a human player.
Project showcase by Jose Luis Bejarano Vasquez
A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.
Project showcase by Gabry295
A PID controlled line follower robot, named Elliot.
Project showcase by SMM2
A low cost turntable for photogrammetry acquisitions. Used by Department of Biology at University of Pisa to acquire 3D models of bones.
Project showcase by alfiosky4
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Building a "waldo" training pendant for the Arduino LittleArm.
Project showcase by Slant Concepts
LittleArm is a 3D printed trainable Arduino robot arm for STEM students and makers.
For my thesis, I have developed the control system and end-effector for a robot, easily implementable and economic.
Project showcase by Team PowerBerry
A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!
Project showcase by Xavier Tan
A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.
Project showcase by ashish_8284
Remote controlled Car designed to navigate a course and lift a small amount of weight.
Project showcase by Jeremy Vestal
Exploring for methane, for water and the temperature on the surface of an unknown planet.
Project showcase by B.E.A.S.T.-7th Senior High School of Trikala, Greece
Manual and programmable robotic arm with fancy control panel.
Project showcase by NerdFatherRJ
The second project draws to a close.
Project showcase by Eric Chen
This is a 3D-Printed hand that is controlled by servos and flex sensors.
Project showcase by Elliot Hicks and Conner Caruso
Line follower made of infrared, photodiode and ultrasonic sensors readout for the tea pack has go down, processing by Arduino.
Project showcase by Sistem Komputer STMIK-AUB Surakarta
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
Or connect with your social account:
New here? Create an account