This is a simple to build, fun 4WD bluetooth controlled robot with a 2DOF gripper and lot's of room to grow!
Project tutorial by Scott Beasley
Project that uses lego NXT motors and a sensor to avoid objects.
Project tutorial by Mark Tashiro
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
This project will show you how to make a DIY 4-wheel robot that can be controlled using a smartphone via Dabble, a mobile application.
Project tutorial by STEMpedia
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Project in progress by ihacklab
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by KittenBot
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
A Bluetooth-enabled RC Car that uses Remote Arduino to allow another Windows device to control it.
Project tutorial by Windows IoT
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
Arduino robot with GoPro camera and FPV function controlled from iPhone via Bluetooth or obstacle avoidance with ultrasonic sensor.
Project in progress by AlxArd
A low cost turntable for photogrammetry acquisitions. Used by Department of Biology at University of Pisa to acquire 3D models of bones.
Project showcase by alfiosky4
It is an enclosed zen garden built into an end table.
Project tutorial by MakrToolbox
Learn how to build a simple battle bot that can be controlled with a PS2 controller via Bluetooth.
Project tutorial by Team CodeDigs
A rotating platform based on a stepper motor 28BYJ48, controlled via the X113647 stepper motor driver by serial dialogue.
Project tutorial by CesareBrizio
Make a simple robotic arm which has master - slave control, and can record and play the moves.
Project tutorial by WolfxPac
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
A homemade CNC machine for cutting PCBs.
Project tutorial by Rui Fernando Caldas
In this project capacitive touch sensing is used to actuate the 3D-printed hand.
Project tutorial by Amal Mathew
Use the Leap Motion to control tanks armed with Infrared LEDs and Infrared Sensors to do battle.
Project tutorial by Sean McCormick
Or connect with your social account:
New here? Create an account