This project will show how to display NIXIE tube by Arduino and Optocoupler chip only
Project tutorial by engineer2you
Build your own Nixie tube clock/thermometer/display with ease.
Project tutorial by Grisha Anofriev
Using SD Card and 16x2 LCD module.
Project tutorial by moty
A four-digit seven-segment counter with three options.
This project describes how to build a GPS data logger at a lower cost.
Project tutorial by yvesmorele
This digital clock speaks the time in two languages (English or Portuguese).
Project tutorial by LAGSILVA
This is a simple clock that tells time in words.
Project tutorial by rakshith bk
Control a 16x2 LCD, including contrast and backlight in code, using a shift register. Includes library with fade and backlight functions.
Project showcase by Mike Kowalski
A simple stopwatch that can store up to 4 split times.
Arduino driver for 8x8 LED Modules controlled via MAX722xx.
Project tutorial by miklas
An ultra flat screen built out of single row of LEDs.
Project showcase by ArduinoKoen
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
Project showcase by OliB150
Custom digital clock using all available resources of a 16x2 LCD to make it look good.
Project showcase by Arduino World
An Arduino UNO large clock on a 16x2 LCD display shield with the ability to change hours and minutes.
This alarm clock and timer work without the help of a computer. All the settings can be done on the clock itself and stored in the EEPROM.
Project showcase by ozyRonald
A realtime battery indicator for your project without extra components or using any analog I/Os.
Basically a digital clock that can have the time changed at the press of a button.
Project in progress by Team SharKode
Build your Nixie Tubes display easy.
Project tutorial by GRA_AND_AFCH
The Nixie Shield allows an Arduino board to connect any Nixie tube to use in your projects.
Project in progress by Marcin Saj
Use your Arduino and build Nixie clock, thermometer and hygrometer. Beautifully made housing and easy to operate.
Interfacing a 2.8 inch SPI TFT that has a ILI9341 chip to an Arduino Uno.
Monitor Oil Temp and Pressure, Water Temp, Voltage, Fuel level.
Display on Nextion display or Nokia LCD
Project showcase by petemnz
This is an uncommon digital clock that can run in three different modes: mode digital and two different modes of binary clock.
This is smart dice of Ludo using Arduino Uno.
Project tutorial by msr048
Or connect with your social account:
New here? Create an account