In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
A basic introduction to the low cost and accurate HC-SR04!
This project will guide you to set up an alarm system using a motion detector.
Did you know that a standard three-wire PC Fan can be used as a sensor?
by Daniel Porrey
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
This little project will show you how to use a soil moisture sensor.
Using the VL53LO and an Arduino for distance measurement.
This project will show you how to use temperature and hmidity (DHT11 and DHT22) sensors with an Arduino card.
Need your project to gauge distance? Here's your module!
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.
by Junez Riyaz
ACS712 current sensor by Allegro is an Hall effect-based linear current sensor.
by Team Instrumentation System
Using the RCWL-0516 radar sensor to detect motion.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
Using ultrasonic sensors to measure distance of obstacles, taking into account temperature and humidity that affect the speed of sound.
by Giannis Arvanitakis
Add hand gestures to your Arduino projects (robots, HMI, lights, etc.).
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
This project shows you how to make a homemade flex sensor.
by Shahir nasar
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
by Dragos Iosub
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Or connect with your social account:
New here? Create an account