My daughter is getting adventurous in her cycling, so I put together a simple logger and speedo to show where she traveled
Project tutorial by au_chrismor
Super easy project using an arduino uno to detect speed of various moving objects with the help of a pair of IR sensors and get the speed.
Project tutorial by YASH36
Thermistors are simple, inexpensive, and accurate components that make it easy to get temperature data for your projects.
Project tutorial by Iasonas Christoulakis
With Arduino + OLED and LCD
Project tutorial by SurtrTech
Temperature monitoring using Arduino and SHT85 with High accuracy.
Project tutorial by Rafi Rasheed T C
This project will show you how to make a probe using a datalogging Arduino shield, some sensors and an RTC.
Project tutorial by MisterBotBreak
Easy peasy reliable tachometer, that you can use to measure the rpm of tools, bicycle wheels, and robots using inexpensive parts.
Project tutorial by PracticeMakesBetter
Don’t you wish your plants would tell you when they needed to be watered? Take your project from breadboard to PCB with this fun tutorial.
Project tutorial by Patchr
Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
How to interface an IR sensor with an Arduino Uno.
Project tutorial by SmartTronics
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
A simple, low-cost flex and pressure sensor!
Project tutorial by Jen Fox and Hacking STEM
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Have you ever wanted to measure the speed of air coming out of your vents at home? Well then we have the perfect project for you.
Project tutorial by Ardunicko
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Use three HC-SR04 ultrasound sensors and two battery displays to show you how close the obstacles are and from which side.
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Project tutorial by lefteris1993
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
+ OLED display, measures in imperial and metric.
Measure distance using JSN SR-04T waterproof ultrasound module and an LCD I2C (cm/inches).
An Arduino electromechanical barometer.
Project tutorial by Mirko Pavleski
Glowing LED to detect the increase in pressure by pressure pad using Arduino.
Project tutorial by Ashish Kumar Senapati
Or connect with your social account:
New here? Create an account