I've always wondered if there were any real differences between temperature and humidity sensors, especially DHT11 and DHT22.
by Achraf Oukheir
Soil moisture sensor which gives you LCD display of percentage of moisture.
Project tutorial by Patel Darshil
Need your project to gauge distance? Here's your module!
Predictive maintenance of industrial motors using high precision 3D magnetic sensor TLV493D-A1B6.
Project tutorial by Vishwas Navada
A simple, low-cost flex and pressure sensor!
Project tutorial by Hacking STEM and Jen Fox
Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.
Project tutorial by Zachary Haslam
Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.
In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.
by Konstantin Dimitrov
Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.
by Dragos Iosub
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field.
Replace the PIR motion sensor with this module and it's 360° detection angle baby!
Using one single module and a proper library you'll be able to measure any AC voltage like a TRMS multimeter.
Project tutorial by SurtrTech
Make a Ultrasonic Range Detector Using Arduino and SR-04F to measure any distance without using rulers with this simple tutorial.
A short and easy tutorial on how to interface the module with UNO board using simple examples.
Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.
Simple Temperature Monitoring with DHT22 & Arduino.
by Muhammad Afzal
Interfacing a VK16E GPS module with an Arduino.
Project tutorial by alaspuresujay
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
Add hand gestures to your Arduino projects (robots, HMI, lights, etc.).
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
The sunflower follows the light using a servo motor and two photoresistors.
Project tutorial by Rick_Findus
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
Or connect with your social account:
New here? Create an account