This project will guide you to set up an alarm system using a motion detector.
by Team ONYX
Create an OLED screen that shows the date, time in digital and analog format, temperature and humidity.
Project tutorial by Chamath Vithanawasam
You activate the bomb by plugging it and hold button to defuse.
Project showcase by Nashboss100
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by adrakhmat
Anemometer or a wind speed measuring device is a common weather station instrument. It was costly online, so I built one!
Project tutorial by Achindra Bhatnagar
MQ2 Sensor is a gas module and it is suitable to detect Hydrogen, LPG, Smoke, CO, and Alcohol. It has high sensitivity and fast response.
by Junez Riyaz
A simple Electromagnetic Field Detector.
Project showcase by justin1445
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
An SKU237545 pressure sensor.
Project tutorial by Fillbee
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Project in progress by Cmtelesann
Arduino Uno-based electronic weighing machine by 5-wire 3 kg load cell.
Project tutorial by Boaz Lawnce
A blind assist tool that provide obstacles notification and GPS location to the guardian / authority via SMS.
Project tutorial by Team MeRo
CAN bus hack for reading the battery diagnostics form an electric car.
Project tutorial by MyLab-odyssey
Reads and stores in SD card, the temperature and humidity values over time.
Project showcase by lmsousa
This is a 360 radar using an ultrasonic sensor that saves data and encodes them onto an image.
Project tutorial by Alireza Karkon
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
Project tutorial by Mohamed Maher
Arduino project to detect lightnings using electromagnetic radiation with frequencies from 7-9kHz.
Project tutorial by runtimeprojects
Arduino learned how to tell the temperature
Project tutorial by Grant
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by brunogomezgil
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
I will explain how connect Arduino with Vibration sensor and LED.
Project tutorial by Alberto Zanon
A project that displays the temperature and humidity of a room on your mobile in real time.
Project showcase by Kaustubh Agarwal
Find the distance from one point to another faster!
Project tutorial by Saaket Poray
Or connect with your social account:
New here? Create an account