CO2 monitor and log based on MQ-135 with temperature and relative humidity correction.
Project showcase by ArduinoKoen
6.4A-2uA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
A really economic street lighting system.
Project showcase by ReddSathvik
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
Project showcase by elegoo-arduino
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by lamaripalma and e-structure_UNO
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
An automated probe that collect CO2 flux data on lake Mendota, WI.
Project showcase by SHUAI ZHANG
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
This project about tracking object by image processing, and use 360 radar technology (developed by A. Karkon) and status alert system.
Project showcase by Alireza Karkon
Developing and mounting sensors on a bike.
Project showcase by Vikram Tokala
You activate the bomb by plugging it and hold button to defuse.
Project showcase by Nashboss100
Homegrown sump pit monitor with Nagios integration.
Project showcase by loupalladino
They claim umbrellas own the ability to prevent from UV. We would like to know the fact and measure the UV value under umbrellas.
Project showcase by NTPC Young Maker Studio
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
Project showcase by Technozz
Here we measure rainfall.
Project showcase by Mahamudul Karim Khondaker
The Grove Gas Sensor (MQ2) module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4 and CO.
This device can remind user to drink water after a set time interval and can remind users when the water is at a right temperature for drink
Project showcase by Team HB
This is my first project, so please like the project and comment down below.
Project showcase by Imperial_Proggramer
An easy project using stuff from the starter kit: Arduino Uno, temperature sensor, 16x2 LCD display, some LEDs and a Piezo.
Project showcase by GioMac
Trackers generate more electricity than their stationary counterparts due to increased direct exposure to solar rays.
Project showcase by LIMPINGLIM
Reads and stores in SD card, the temperature and humidity values over time.
Project showcase by lmsousa
This project uses an ultrasonic sensor to "sense" if the door opens or closes.
Project showcase by MattG
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by Team IoTBoys
Or connect with your social account:
New here? Create an account