This will prevent you from going back to sleep after snoozing that since now you have to solve a math problem to snooze the alarm.
Writing in a 4 digit 7 segment LED display.
Arduino Running Man Game in 2 Minutes | Arduino game with touch sensor| Part 2
This project detects changes in temperature based on your specifications, and then changes the color of a LED to the color of your choosing.
Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!
Using LEDs as Binary No. and 2 button switches to add or subtract 1 point per push.
by Team P.O.I.N.T.
A simple tutorial on getting readings from an ultrasonic sensor
by Damien Murtagh
This tutorial will show you how to use DHT11 with Arduino.
Simple Temperature Monitoring with DHT22 & Arduino.
by Muhammad Afzal
Make your own Arduino coin eater/bank. A DIY Arduino idea.
Arduino-Android car controlled via Bluetooth module.
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
Sending Bytes to an 8x8 LED Matrix.
This article provides a brief overview of the Internet of Things.
by Pooja Baraskar
This project illustrates switching using a transistor.
How to design circuits that allow you to drive a load that needs a higher value of voltage or current than Arduino can drive.
Why you can blank, void setup()
Snap Circuits® makes learning electronics easy and fun! These projects are designed for younger kids who want to get introduced IoT.
by Daniel Porrey
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
Making a simple system to controll a lamp or some other appliance in your house.
by Team Azoreanduino
We will teach you that it is possible to write only one Serial.print line to display several messages.
by 3 developers
A clock, controlled by a RTC module, that you can see on a 4-digit display.
Drag-and-drop graphical programming portable software for Windows + uploading + supervision.
Integrate Blockly@rduino in IDE like a tool, compile and upload through Arduino IDE, totally graphic way.
Or connect with your social account:
New here? Create an account