Upgrade old manual kiln to a digital controller with firing schedules (ramp, target, hold) and data logging.
Project showcase by MrRoboto19
No more spreading germs through doorbells.
Project showcase by gadhaguy
Costs around $120 USD (incredibly cheap compared to competitors) and uses easy-to-find components.
Project showcase by Pablerdo
Image transmit and Control by Smartphone 4WD Robot Car over Bluetooth
Project showcase by Alf81010
If you can't find a voltmeter at home or anywhere else, then this hack is for you!
Project showcase by Team Next Tech Lab
Secure your device with emrine.com QR code access control.
Project showcase by bertrandmartel
O foco principal deste estudo foi facilitar o aprendizado e o ensino de química através de um titulador automático microcontrolado
Project showcase by iterlandesjr
An Arduino analog clock refreshed by GPS on TFT display - Steampunk GPS Clock.
Project showcase by Mobifu1
Adruino-controlled incubator for chicken eggs or other stuff.
Project showcase by quantenschaum
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Project showcase by Arnov Sharma
A slide whistle that plays anything you program in, so you are not at risk of spreading or receiving germs.
Project showcase by gurpr337
I took an HC-05 and added it to my handheld GPS device to get coordinates on my Android tablet.
Learn to flash Red and Blue LED's to resemble police Lights.
Project showcase by Jolynn Awesome
The Goggles paired with sensor detect the motion of an eye, activating a range of hands-free task such as turning on /off a light.
Project showcase by Ikhsan Ismail
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
While debouncing needs improvement, it's a good start to understand interrupts!
Project showcase by John Boxall and CesareBrizio
We implement RS-485 protocol in communication between two Arduinos using MAX485 module.
Project showcase by Maurizfa (13216008) / Arthur Jogy (13216037) / Agha Maretha (13216095)
We implement CAN Bus communication with MCP2515 module to communicate between two Arduino for sending temperature data from DHT
It is an automated night lamp based with a real time clock.
Project showcase by Yash Nayak
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project showcase by Team Maverick
VOLCADE is a MIDI controller for volca built with 7 arcade control board that switches between chord progressions using the arcade joystick.
Project showcase by zombits
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
Create digital dice in 15 minutes!
Project showcase by SKYMDev
Or connect with your social account:
New here? Create an account