In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
In this article, you'll learn how to develop a simple thermometer using digital temperature sensor with Arduino.
Project tutorial by PCBWay and Silícios Lab
+ LCD/OLED can be used to measure body temperature or to detect movement... in Celsius and Fahrenheit!
It is a miniature counterpart of radio altimeter used on commercial aircrafts to be used with RC aircrafts and multirotors.
Project tutorial by AeroGeeks
It might be the simplest room temperature and humidity - no breadboard attached.
Project tutorial by
You can close your eyes, but you cannot close your ears.
Project tutorial by Nekhil ravi
This smart stick can help blind people walk on the street safely without any help.
There are a lot of Arduino-based metal detectors using various technologies. This is one of them that uses direct frequency measurement.
Project tutorial by Andrius Purr
The detector can detect a small metal coin at a distance of 15 centimeters.
Project tutorial by Mirko Pavleski
Speedometer that uses a GPS for speed sensing and an RGB LED to indicate speed to the user. Also features a blinking white light.
Project tutorial by Jeremy S. Cook
Pulse induction metal detector, built on the Arduino Nano.
Project showcase by
In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
In this tutorial, you will learn how to calibrate and use MQ9 gas sensor with an Arduino board.
Easy to build, but comparable with professional seismometers, homemade Arduino seismometer.
Learn how to use a PIR motion sensor to detect movement. You will also learn how PIR motion sensors work and how to use them.
In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.
An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.
Project showcase by Mustafa Hesham
It's a screen with colorful backlight that shows you some information about printing progress.
Project tutorial by ralex2304
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by lamaripalma and e-structure_UNO
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
A modular orientation and acceleration data logger using a pair of ultrasonic sensors, RF transceivers, and a 1Sheeld.
Project tutorial by HyperChiicken
Project tutorial by dev009
Simple project to measure temperature (with two sensors) and humidity, and send them to the terminal (monitor) and also to a LCD display.
Project in progress by
This little project will show you how to use a soil moisture sensor.
Or connect with your social account:
New here? Create an account