Use two relays to create a flip flop, then create a binary counter with 10 relays - a great way to introduce students to digital logic
Project tutorial by Doug Domke
8 lines of code to setup and 1 line of code per variable for the Arduino, no programming on the PC side. USB-WiFi-Ethernet-Serial.
Project tutorial by user1793315 and Johi
Verilog quick learning. Feasibility model creation. Accurate logic volume estimation. I2C connection. Education purpose.
Project tutorial by ebaera
An example sketch that will read a simple toggle switch reliably, irrespective of the circuit design.
Project tutorial by ronbentley1
Use Arduino, an OLED display and an AD9833 DDS module to create a useful wave generator for your lab.
Project tutorial by janux
This function performs FFT with very good speed while maintaining accuracy.
Project tutorial by abhilash_patel
This project is performing a faster frequency transform (FFT).
It is a visual representation of qubits entangled or not. Qubits are simulated with an Arduino firmware, by a biased randomness & collapsed.
Project tutorial by Jose Romaní
This project is about an Arduino Library to control the BK1086 and BK1088 devices. It was based on "BK1086/88E BROADCAST AM/FM/SW/LW RADIO R
Project tutorial by pu2clr
In this project, I will show you how we can use a 3€ IR distance sensor to build a proper DIY tachometer that functions properly.
Project tutorial by GreatScottLab
Having a high power digital dimmer which can be controlled with Arduino is a treat to have, I use it to control my heat gun and drill.
Project tutorial by Tanishq Jaiswal
Very fast multi-channel oscilloscope with real-time and equivalent-time sampling.
Project tutorial by aimukhin
A guide how to control 7 segment display with Shift register as well as daisy chain them to create multi digit displays
Project tutorial by mdraber
This is an Arduino library for the SI4844, BROADCAST ANALOG TUNING DIGITAL DISPLAY AM/FM/SW RADIO RECEIVER, IC from Silicon Labs.
This project is about a shortwave trasmitter from 3 MHz to 30 MHz. It uses the SI5351 oscillator from Silicon Labs controlled by Arduino.
This is an Arduino Library to control the AKC695X / M695X DSP radio devices.
In this project we take a look at making the Arduino Nano 33 BLE learn a few gestures and how to integrate it with a game!
Project tutorial by Zoromoth
Purpose of this project is to write a code to control coin acceptor with Arduino so it can be used in other projects
This code reads PPM signal from RC receiver by making use of interrupt pin.
This code performs FFT with good accuracy.
A lightweight simulator to run programs compiled for PICmicro on Arduino.
Project tutorial by Dilshan Jayakody
Program 6 ATtiny85/13A at the same time with this custom programmer board.
Project tutorial by Arnov Sharma
An example of how to subscribe to a characteristic of a service.
Project tutorial by Avilmaru
We will use our M.P.U. 6050 to control a Graphic unit or say Model Paper Plane, which is commonly known as Teapot, with our M.P.U. 6050!
Project tutorial by Mission Critical
Or connect with your social account:
New here? Create an account