Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
Project tutorial by Shubham Shinganapure
Let's make a fully autonomous robot using Arduino and IR sensors. It can explore the surface of a table without falling!
Motor driver circuit with some power saving features.
Project in progress by Patel Darshil
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Pluto is a 2WD Bluetooth car on which is placed a self-balancing plane.
Project tutorial by 3 developers
How to use a Servo.
5in1 educational Arduino-compatible set I made for my nieces
Project tutorial by bzqp
A basic robot using Arduino.
Project tutorial by Renga
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Project showcase by potentprintables
Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.
Project tutorial by Patrick Müller
Avoid conflict with other libraries, use ServoTimer2 and run servo motors with ease.
Project tutorial by ashraf_minhaj
This is our new Bluetooth RC car - based on our favorite Arduino Uno!
Project tutorial by ardumotive
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
It's an arm that can move and pick up some things.
Project tutorial by Team tRee
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.
Project in progress by Rafath Bin Zafar
I have a little paint booth in my shop, so I created a device to shake paint cans for me.
Project tutorial by MakrToolbox
A panel to control the pitch of a wing (or aircraft or control surface deflection) in a small wind tunnel.
Project tutorial by dancili
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Or connect with your social account:
New here? Create an account