Project tutorial by sharma_himanshu
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
Ever wanted to control a cockroach on the cheap? Now you can!
Project tutorial by bravoechonovember
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.
by Alex Glow
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.
A very simple clock made with 2 Arduino nanos and two stepper motors.
Project showcase by garysat
With the Auto-Turret Project, you can automatically track down and fire upon your enemies! This project utilizes a Pixy camera module.
Project tutorial by RobotGeek Projects Team
Very basic obstacle avoidance robot that I used to introduce my 9 yo nephew and 7 yo niece to robotics...
Project tutorial by Jeremie
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
We used The Tactigon to control an Arduino-powered robot via BLE. Moving The Tactigon as a 3D steering wheel is awesome!
Project tutorial by Team the tactigon team
Or connect with your social account:
New here? Create an account