Do you want to create your own robot? Then this is your best guide. This is a smart robot controlled by an Android app so easy to build.
Project tutorial by MEGA DAS
5in1 eucational Arduino-compatible set I made for my nieces
Project tutorial by bzqp
Pluto is a 2WD Bluetooth car on which is placed a self-balancing plane.
Project tutorial by CRISTIAN SARVIA and MatteoDanna
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Here is a step by step guide to making a "crawler robot."
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.
Project showcase by Team Maverick
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A basic robot using Arduino.
Project tutorial by Renga
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
How to use a Servo.
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
It's a BLDC motor based jet turbine.
Project tutorial by Arnov Sharma
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
Or connect with your social account:
New here? Create an account