A project that uses SG-90 Micro Servos to shoot Lego cannons, because why not.
Project tutorial by ShreyanR
GRBL and CNCJS Tutorial
Project tutorial by Arnov Sharma
Digital calendar clock using Arduino Uno, I2C LCD and 1307 RTC module.
Project tutorial by Akshay Joseph
Do you want to build a Robot that can walk dance and sing for you! Then this is the ultimate guide that can help you through.
Project tutorial by MEGA DAS
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by YASH36
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Here is a step by step guide to making a "crawler robot."
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
A basic robot using Arduino.
Project tutorial by Renga
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
It's a BLDC motor based jet turbine.
Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!
Project tutorial by Danny van den Brande
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.
Project tutorial by Hermes
A super simple stair climbing robot.
Project tutorial by Jason Jaeger
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Ever wanted to control a cockroach on the cheap? Now you can!
Project tutorial by bravoechonovember
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
Or connect with your social account:
New here? Create an account