Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!
Project tutorial by T3ch Flicks
Build a table lamp that's sturdy and smart.
Project tutorial by msr048
The ball and beam system is laboratory equipment with high nonlinearity in its dynamics and PID control.
Project tutorial by Karem Ben Chikha
Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.
Project in progress by Esther He
Arduino Uno-based electronic weighing machine by 5-wire 3 kg load cell.
Project tutorial by Boaz Lawnce
This project about tracking object by image processing, and use 360 radar technology (developed by A. Karkon) and status alert system.
Project showcase by Alireza Karkon
Aviation meteorology station with Arduino.
Project in progress by Team ArduWeather Team
Water quality, anywhere, anytime!
Project tutorial by Hao Jie Chan
In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.
Project tutorial by Nick Koumaris
This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.
Project showcase by Telina
Experimental system for Structural Health Monitoring (SHM), based on the Arduino.
Project showcase by e-structure_UNO and lamaripalma
Conception of connected bird feeders, able to alert if the seed tank is empty and analyses its use by birds.
Project showcase by ESIEE-Amiens Students
Learn how to model the sensor and getting a reliable distance measurement using Simulink and Arduino.
Project tutorial by MATLAB Makers
Open source Smart energy monitor with some new features like Terminal Commands, Readings Logger, and Data Plotting.
Project tutorial by Mohamed Maher
It is a standard INA219 module but this has an isolated measured voltage from the MCU.
Project tutorial by Tadeas Dvoracek
It can measure fine dust, humidity, temperature and CO2 concentration in the air and check it on the internet in real time.
Project tutorial by 4 developers
So the big aim here is obviously to predict the rain in the future. We'll build a system that does just that from scratch!
Project tutorial by danionescu
A project that speaks on behalf of mother nature. It is real time air quality monitoring device.
Project tutorial by Team Oizom
A fall detection system based on Arduino, Windows 10 and Microsoft Azure
Project tutorial by Jiong Shi
If the temperature measured by DS18B20 is above the predefined threshold, it turns the fan on automatically unless the piezodisk is pressed.
Project tutorial by Kutluhan Aktar
The project consists of reading values for pitch and roll, and communicating the modified values over serial to the display.
Project tutorial by 4D Makers
Arduino and Raspberry Pi. Sensing motion, temperature, vibration, VOC and CO2, altitude, current, and voltage. Powered by 120VAC and relays.
Project tutorial by Jade Perreault
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
Or connect with your social account:
New here? Create an account