In this tutorial, you will learn how to use a soil moisture sensor. Practical examples are also provided to help you master the code.
+ OLED display, measures in imperial and metric.
Project tutorial by SurtrTech
Digital Bathroom scales you get for $20, not more expensive then mechanical analog scales, BUT so boring in design. Lets do it better !
Project showcase by plouc68000
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
How to connect GPS, SONAR, sensors, auto pilot units etc. in ships and boats via NMEA 0183 to Arduino.
Project tutorial by hwhardsoft
Pressure tendency can forecast short-term changes in the weather. This is a very sophisticated device designed for sailors, yachtsmen, etc.
Project tutorial by Mirko Pavleski
Variometer is instrument that indicates the changes in the altitude variations.
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
In this case, it is interesting that are used two sensors to scan the entire 360-degree space.
Read temperature and humidity values in a remote location and store the data in an SD card.
Project tutorial by Arduino_Genuino
Our Gnome becomes a weather forecaster with an Arduino Nano Every and a pressure sensor. Get your local forecast without the internet.
In this project, I have shown how to interface a GPS module with Arduino UNO. The data for longitude and latitude is displayed on the LCD.
Project tutorial by Ruchir Sharma
This is an updated version of the fire alarm I made. it includes a gas sensor and an app for control
Project showcase by ayanfeoluwaadekanye1
Use an Arduino, two small servo motors with light sensing photo resistors to steer a solar panel towards the sun. UPDATED
Project tutorial by scott mangiacotti
Someone has been eating my cookies! Thankfully Arduino is here to help find out who it is.
Project tutorial by Dante Roumega
Short and easy, read distance 2 - 400 cm and plot it in I2C OLED screen.
Project tutorial by javier muñoz sáez
This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.
Project tutorial by Ammar Atef Ali
A simple VU meter realized with only mechanical typical items, as screws or nuts, but powered by Arduino!
Project tutorial by marcocroce
How to connect Atlas's Co2 sensor to an Arduino Uno.
by Atlas Scientific
Check the humidity & temperature of your terrarium with a DTH22 humidity and temperature sensor and display this on an LCD I2C 16x2 display.
Project tutorial by Team GiftedMedia
We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.
Project showcase by IoTBoys
Arduino collects and calculates basic statistics on the acquired analog (temperature) data: average, standard deviation, min and max.
This project uses an ultrasonic sensor to "sense" if the door opens or closes.
Project showcase by MattG
In this tutorial, you’ll learn how to use the LSM303DLHC GY-511 compass module with Arduino to make a digital compass.
Or connect with your social account:
New here? Create an account